Filter
Top Products
3 – Event Messages
Critical Events
59060-05 A 3-53
A
(C) (8400.0060) (Switch) (Warning-Illegal transparent mode configuration, primary and
backup cannot be mapped to the same port. Port port_number 's backup
mapping has been deleted.
Meaning: When mapping TH ports to TF ports, the primary and backup TF
ports cannot be the same for a given TH port.]
(C) (8400.0061) (Switch) (Warning-Illegal transparent mode configuration, Either the
primary or backup map for port port_number was set to a port whose type is
not TF. The mapping for this port has been cleared.
Meaning: An attempt was made to map a TH port to a port that was not of
type TF.
(C) (8400.0062) (Switch) (New firmware has been installed.)
Meaning: New firmware was successfully installed.
(C) (8400.0065) (Switch) (The switch is being automatically hardreset after leaving the
Diagnostics AdminState.)
Meaning: The switch automatically undergoes a hard reset after leaving the
Diagnostics administrative state.
(C) (8400.0066) (Switch) (IOn) (Blade is being automatically hardreset after leaving the
Diagnostics AdminState.)
Meaning: I/O blade is undergoing a hard reset after leaving the Diagnostics
administrative state.
(C) (8400.0067) (Switch) (The switch is entering Diagnostics AdminState and will
automatically hardreset and have the configured AdminState when leaving
the Diagnostics AdminState.)
Meaning: The switch is entering the Diagnostics state and will automatically
undergo a hard reset. The switch will return to the configured
administrative state after leaving the Diagnostics administrative
state.
(C) (8400.0068) (Switch) ( IOn) (Blade is entering Diagnostics AdminState and will
automatically hardreset and have the configured AdminState when leaving
the Diagnostics AdminState.)
Meaning: The I/O blade is entering Diagnostics state and will automatically
undergo a hard reset. The I/O blade will return to the configured
administrative state after leaving the Diagnostics administrative
state.