Q-Logic FIRMWARE VERSION 7.4 Switch User Manual


 
3 – Event Messages
Critical Events
59060-05 A 3-47
A
Critical Events
Critical events are events that disrupt the administration or operation of the fabric,
but do not require any action before you can proceed. The following lists each
critical event and the event id number and message displayed, and provides an
explanation of the message.
(C) (8100.0001) (Name Server) (Port: port_number) (Protocol violation from address
FC_address)
Meaning: There has been a name server protocol violation. Contact your
authorized maintenance provider.
(C) (8300.0006) (Zoning) (Dropping lock held by domain domain_ID, Merge requests
outstanding)
Meaning: Another switch has held the fabric zoning lock too long. It is being
released to accommodate another fabric zoning request.
(C) (8300.000A) (Zoning) (Fabric Busy, failing lock request from domain domain_ID)
Meaning: Another switch in the fabric has requested the fabric zoning lock
from this switch while this switch is processing zoning commands.
(C) (8300.000B) (Zoning) (Failed to lock fabric, lock already held by switch with domain
domain_ID)
Meaning: Unable to complete the requested zoning command because fabric
zoning lock is already held by another switch in the fabric.
(C) (8300.000C) (Zoning) (Couldn't acquire lock from domain domain_ID)
Meaning: Fabric may be changing, couldn't acquire lock. Wait for fabric to
stabilize, try again.
(C) (8300.000E) (Zoning) (Failing release of fabric lock held by switch with domain=
domain_ID)
Meaning: Unable to release fabric zoning lock because it is held by another
switch in the fabric.
(C) (8300.000F) (Zoning) (Failed to lock fabric, lock already held with lock id lock_id)
Meaning: The fabric is already locked.
(C) (8300.0017) (The zoning database has been reset and zoneset zone_set deactivated by
user user_name)
Meaning: The zoning database was reset while a zone set was active. The
zoning information was cleared and the active zone set was
deactivated.