Filter
Top Products
3 – Event Messages
Critical Events
59060-05 A 3-55
A
(C) (8400.007B) (Resaving the security config as a result of a CPU switchover)
Meaning: A CPU blade switchover occurred while saving the security
database. A save ‘retry’ will now occur.
(C) (8400.007C) (CPUn) (Switching over to Secondary blade_ID)
Meaning: Control is transferring from the primary CPU to the specified
secondary CPU blade.
(C) (8400.0080) (Switch) (blade_ID) (Blade fault blade_fault processing in progress,
gathering support information...)
Meaning: The system is gathering support information in response to the
blade fault that occurred on the specified blade.
(C) (8400.008A) (A Zoning merge has occurred)
Meaning: Two fabrics have been connected and their zoning databases have
been merged.
(C) (8400.008D) (Illegal configuration detected based on licensing. Configuration will be
updated.)
Meaning: The restoration of a configuration backup has violated current
feature licensing. The active configuration will be automatically
updated based on current licensing.
(C) (8400.008E) (Inconsistent configuration defaults detected. Defaults will be updated.)
Meaning: Two fabrics have been connected, and their zoning databases
have been merged.
(C) (8400.008F) (Attempted speed licensed upgrade that is already enabled)
Meaning: An attempt was made to install a license for a port speed that is
already operable on the switch.
(C) (8400.0096) (Secondary CPU firmware update complete)
Meaning: The update of the firmware image on the secondary CPU is
complete.
(C) (8600.0009) (PortApp) (Port: port_number) (Link reset (LR) to be performed on port
port_number.)
Meaning: The port will perform a link reset (LR) due to a loss of credit
problem.
(C) (8600.000A) (PortApp) (Port: port_number) (Link reset (LR) to be performed on port
port_number.)
Meaning: The port will perform a link reset (LR) due to a loss of credit
problem.