Q-Logic FIRMWARE VERSION 7.4 Switch User Manual


 
3 – Event Messages
Alarm Events
59060-05 A 3-31
A
(A1005.0099) (Canceling IPsec edit mode as a result of a CPU switchover)
Meaning: A CPU switchover occurred while an Ipsec Edit session was in
progress. The edit session was canceled.
Action: Open another Ipsec Edit session.
(A1005.0101) (ipv6: duplicate address detected)
Meaning: Another IP version 6 system on the local network is using the same
address as this switch.
Action: If the discovery method is static, assign a different IP version 6
address, or disconnect the device that is using the same address.
(A1005.009B) (IPSec configuration error: error_description)
Meaning: An error occurred while saving changes to an IP Security
configuration. None of the configuration modifications have been
applied to the switch’s active database.
Action: Resolve any other IP Security alarms. If this alarm persists, contact
your authorized maintenance provider.
(A1005.009C) (IPSec configuration error: Association assocation_name : error_description
Meaning: An error occurred affecting the specified association while saving
the IP Security configuration. The association has not been applied
to the active database.
Action: Redo modifications to the association and save it.
(A1005.009D) (IPSec configuration error: Policy policy_name : reason)
Meaning: An error occurred affecting the specified policy while saving the IP
Security configuration. The policy has not been applied to the
active database.
Action: Redo modifications to the policy and save it.
(A1006.0004) (Zoning conflict, device_WWN is in an ACL hard zone, but device_WWN
share a soft zone)
Meaning: The named zone members cannot communicate because they are
members of different ACL hard zones.
Action: Place both zone members in the same ACL hard zone or exclude
both from ACL hard zones.
(A1006.0005) (Zoning enforcement error in Nameserver)
Meaning: An error occurred while checking ACL zoning.
Action: Contact your authorized maintenance provider.