Q-Logic FIRMWARE VERSION 7.4 Switch User Manual


 
3 – Event Messages
Alarm Events
59060-05 A 3-7
A
(A1003.0021) (Failing remote zoning configuration, Zoneset is empty)
Meaning: An empty zone set was included as part of a zone merge and was
rejected.
Action: Modify the zoning database on the remote switch to remove or
correct the empty zone set.
(A1003.0022) (Unable to update database with newly activated information, Zoning Save in
Progress)
Meaning: Modifications were being made to the security or zoning database
while a security set or zone set was being activated or deactivated
from a remote switch.
Action: Try the activation or deactivation again later.
(A1003.0023) (Fabric Busy Zoneset operation failed)
Meaning: The activation or deactivation of a zone set failed because the
fabric is currently busy.
Action: Try the activation or deactivation again later.
(A1003.0024) (Request already in progress (internal lock held))
Meaning: A fabric operation is currently in progress.
Action: Wait and try again.
(A1003.0025) (Error reading security set.)
Meaning: There was a problem handling the activate direct management
server command. The format of the command was not standard.
Action: Check the security configuration.
(A1003.0028) (SFC failure received from remote switch with domain domain_ID)
Meaning: The remote switch given by domain_ID rejected the Staged Fabric
Configuration (SFC) message, so the SFC request has failed.
Action: Check the status of the remote switch at the given domain ID.
There could be an issue with the security configuration or the
zoning configuration.
(A1003.0029) (No response received from switch with domain ID domain_ID)
Meaning: The remote switch given by domain_ID did not reply to an Acquire
Change Authorization (ACA) message, so the ACA request has
failed.
Action: Check the status of the remote switch at the given domain ID.
There could be an issue with the security configuration or the
zoning configuration.