3 – Event Messages
Alarm Events
3-30 59060-05 A
S
(A1005.0074) (Blade seating is questionable)
Meaning: A SANbox 9000 blade is improperly installed.
Action: Examine the switch and reinstall blades as needed.
(A1005.0075) (Blade seating problem was resolved)
Meaning: The SANbox 9000 blade seating problem as resolved.
Action: None
(A1005.0076) (Extraction latch is open)
Meaning: A SANbox 9000 blade latch is open.
Action: Examine the switch and close open latches.
(A1005.0077) (Extraction latch was closed)
Meaning: The SANbox 9000 blade latch has been closed.
Action: None
(A1005.0078) (Extraction latch ignored until hotreset completes)
Meaning: Extraction latch was opened while a switch hot reset was in
progress.
Action: Return the extraction latch to the closed position. Wait until the hot
reset is complete, then remove the blade.
(A1005.0079) (Blade fault fault reported from primary CPU, resetting switch)
Meaning: A blade fault has occurred on the SANbox 9000 primary CPU
blade and the switch is resetting.
Action: Contact your authorized maintenance provider.
(A1005.007A) (Blade fault fault reported from primary CPU, powering off blades/ports)
Meaning: A blade fault has occurred on the SANbox 9000 primary CPU
blade. I/O blades are being powered down.
Action: Contact your authorized maintenance provider.
(A1005.007C) (Secondary CPU's latch is closed so now able to become Fault Tolerant)
Meaning: The SANbox 9000 secondary CPU blade latch has been closed;
the switch is now fault tolerant.
Action: None
(A1005.007D) (Canceling callhome edit mode as a result of a CPU switchover)
Meaning: A CPU blade switchover occurred while a CallHome Edit session
was open. The CallHome Edit session was canceled.
Action: Reopen the CallHome Edit session.