Q-Logic FIRMWARE VERSION 7.4 Switch User Manual


 
3 – Event Messages
Alarm Events
59060-05 A 3-9
A
(A1003.0031) (Error reading zoneset from activate direct.)
Meaning: A device supporting the management server has sent an Activate
Zoneset Direct $(AZSD) command that did not follow the expected
standard layout.
Action: Contact your authorized maintenance provider.
(A1003.0032) (Zoneset zone_set_name failed validity checks (empty or contains empty
zone/alias))
Meaning: The zone set either has no zones or contains a zone or alias
without members.
Action: Add zones and members, or remove the empty zones and aliases
from the zone set.
(A1003.0033) (No memory for command completion)
Meaning: Insufficient switch memory.
Action: Contact your authorized maintenance provider.
(A1003.0034) (Merge failed, total zoneset limit would be exceeded.)
Meaning: A fabric merge failed because the combined number of zone sets
exceeds the zoning database limit.
Action: Remove zone sets from the local switch zoning database to allow
the fabric merge to complete.
(A1003.0035) (Merge failed, invalid zone data received, ISOLATING)
Meaning: A remote switch sent a zone merge that was invalid.
Action: Reconcile interoperability modes on the local and remote switches
so that they are the same.
(A1003.0036) (Merge failed, member limit for zone zone_name exceeded, (size=
member_number, limit= member_limit))
Meaning: A fabric merge failed because the combined number of members
in two zones having the same name exceeds the limit for the
number of members in a zone.
Action: Remove members either from the zone on the local switch or the
remote switch so that the combined sum is less than member limit.
(A1003.0037) (Merge failed, Total zone member limit would be exceeded)
Meaning: A fabric merge failed because the total number of zone members
exceeds the zoning database limit.
Action: Remove zone members either from the local switch or the remote
switch so that the combined sum is less than member limit.