Filter
Top Products
3 – Event Messages
Alarm Events
59060-05 A 3-39
A
(A1007.0030) (Security protocol not using chap, unable to authenticate.)
Meaning: A Challenge Handshake Authentication Protocol (CHAP) negotiate
frame was received that specifies an unsupported Diffie-Helmann
(DH) group type.
Action: Check the remote device for a possible error condition. Reset the
port. If errors continue, disable CHAP for this device if it belongs in
the fabric.
(A1007.0031) (Security protocol not using chap, unable to authenticate.)
Meaning: A Challenge Handshake Authentication Protocol (CHAP) negotiate
frame was received that specified an unsupported hashing
algorithm or an algorithm that is not allowed for this security
member's configuration.
Action: Check the remote device for a possible error condition. Reset the
port. If errors continue, disable CHAP for this device if it belongs in
the fabric.
(A1007.0032) (Fabric conditions or configurations do not currently allow for changing
fabric binding.)
Meaning: An attempt to change the fabric binding setting was rejected due to
current fabric binding configuration settings within the active
security set.
Action: Check fabric binding settings and the domain IDs of the switches
within the fabric. Add missing switches to the ISL group of the
active security set.
(A1007.0033) (Device device_WWN failed port binding.)
Meaning: A device attempted fabric login (FLOGI), but that device was not
configured in the port binding list for the specified port.
Action: Add the device to the port binding list.
(A1007.0034) (Device device_wwn failed switch binding.)
Meaning: A device attempted fabric login (FLOGI), but that device was not
configured in the switch binding list for the specified switch.
Action: Add the device to the switch binding list.
(A1007.0035) (Port taken offline due to switch binding failure following configuration
change.)
Meaning: A configuration change was made to the switch binding list such
that the device(s) on the port were no longer allowed to be logged
in.
Action: Add the devices to the switch binding list.