Filter
Top Products
3 – Event Messages
Critical Events
59060-05 A 3-57
A
(C) (8600.001A) (PortApp) (Internal port license became available, re-starting downed
internal ports)
Meaning: A license has become available and ports that had been previously
downed to due to unavailable licenses will be restarted.
(C) (8600.001B) (RX Seq Error D_ID sequence_destination S_ID sequence_source SEQ_ID
sequence_ID OX_ID originator_exchange RX_ID recipient_exchange CMPLT
complete_status NFRAMES frame_count)
Meaning: An error was encountered while handling the receive sequence
referenced in the log message. Contact your authorized
maintenance provider.
(C) (8700.0007) (EPort) (Port: port_number) (Received frame from address not in Access
Control List (ACL) hard zone (src address = FC_address, dest address =
FC_address))
Meaning: The destination for the receive frame is in an ACL zone and the
source is not. The frame will not be forwarded.
(C) (8700.000D) (EPort) (Port: port_number) (Resetting Inter-Switch Link (ISL), a time out
value has been reconfigured.)
Meaning: The Resource Allocation (R_A_TOV) or Error Detect (E_D_TOV)
timeout value has been reconfigured. E_Ports will be automatically
reset to inform the neighbor switch of the change.
(C) (8700.000E) (EPort) (Port: port_number) (InteropCredit value was reconfigured,
resetting port.)
Meaning: The InteropCredit parameter has changed. The affected port will
be automatically reset.
(C) (8700.000F) (EPort) (Port: port_number) (Broadcast frame received & broadcast
disabled, discarding broadcast frames.)
Meaning: Broadcast is disabled and the switch has received a broadcast
frame. Enable broadcast to receive broadcast frames.
(C) (8700.0010) (EPort) (Port: port_number) (Inter-Switch Link (ISL) unstable. ISL init will be
held back until ISL up time is 5 seconds)
Meaning: The ISL is unstable, indicating that the media module or the cable
is bad.
(C) (8700.0011) (Eport) (Port: port_number) (Connection failure, remote switch not
compatible)
Meaning: The remote switch is not compatible with the local switch. The
E_Port cannot exchange switch capabilities with the remote switch.