Filter
Top Products
3 – Event Messages
Alarm Events
3-32 59060-05 A
S
(A1006.0006) (Zoning conflict, device_WWN and device_WWN do not share an ACL hard
zone, but device_WWN share a soft zone)
Meaning: The named zone members cannot communicate because they are
members of different ACL hard zones.
Action: Place both zone members in the same ACL hard zone or exclude
both from ACL hard zones.
(A1007.0001) (Security: Unspecified zoning enforcement error)
Meaning: A device was not authorized or it failed security checks and will not
be allowed to join the fabric.
Action: None
(A1007.0002) (Security: Remote Switch with WorldWide Name (WWN) wwn configured for
chap, no chap configured for local switch. 2-way Authentication Failure)
Meaning: The device WWN is either not configured in the security database,
or it is not configured for Challenge Handshake Authentication
Protocol (CHAP).
Action: Add the device WWN to the active security set if it missing, or
modify the group to allow for CHAP authentication with the other
devices.
(A1007.0005) (Security: Authentication request was rejected by port.)
Meaning: Indicates that a remote switch rejected a security authentication
attempt. The port will isolate.
Action: Checks the security configuration on the remote switch to
determine the problem.
(A1007.0006) (Security: Could not validate Authentication Response from port_number,
payload seems to be incorrect.)
Meaning: The format of the payload of the response frame does not match
what was expected.
Action: Check for errors on the remote side of the link. Check the
transceiver and cable. Update firmware on remote switch.
(A1007.0007) (Security: Fabric Binding (ESA) not supported on remote switch and Fabric
Binding is enabled, failing security checks)
Meaning: Either fabric binding is not enabled on the remote switch or the
remote switch does not support security at all.
Action: Check the security configuration on the remote switch.