Q-Logic FIRMWARE VERSION 7.4 Switch User Manual


 
3 – Event Messages
Alarm Events
59060-05 A 3-21
A
(A1004.0056) (Blade compromised due to internal data link failure (SET))
Meaning: An I/O blade has been compromised due to failure of its internal
data link to the CPU blade.
Action: Contact your authorized maintenance provider.
(A1004.0057) (Blade no longer compromised due to internal data link failure (CLEAR))
Meaning: The I/O blade link failure has been resolved.
Action: None
(A1004.0060) (Virtual Lanes configuration change will take effect on next port reset)
Meaning: The virtual lanes configuration does not become active until you
reset the port.
Action: Reset the port.
(A1005.0006) (Request from WWN device_WWN address FC_address, failed authentication,
verify MS security configuration)
Meaning: Management server authentication is enabled, and the received
frame failed authentication.
Action: Verify the MS group configuration.
(A1005.000A) (Cannot enforce zoning for member domain_ID, port_number, this zone
member will be ignored)
Meaning: A zone member given by domain ID and port number could not be
found in the fabric.
Action: Examine the fabric connections and zoning definitions.
(A1005.000C) (Configuration error, insufficient credit in pool. Extended credit not granted
for port port_number)
Meaning: Insufficient credits were available in the credit pool to grant the
credit request.
Action: Decrease the number of requested credits or add more donor
ports.
(A1005.000D) (Configuration error, insufficient credit in pool. Extended credit not granted
for port port_number)
Meaning: Insufficient credits were available in the credit pool to grant the
credit request.
Action: Decrease the number of requested credits or add more donor
ports.