Filter
Top Products
3 – Event Messages
Alarm Events
3-36 59060-05 A
S
(A1007.0020) (MAX Retry count reached on CHAP Authentication Protocol Reset, failing
Authentication)
Meaning: A Remote Authentication Dial In Service (RADIUS) server has
rejected a RADIUS authentication request.
Action: Check the configuration on both the switch and on the RADIUS
server for incompatibilities.
(A1007.0021) (No response to RADIUS access request for device on port port)
Meaning: A configured Remote Authentication Dial In Service (RADIUS)
server did not respond to an authentication request within the
timeout period.
Action: Check RADIUS server configuration and the RADIUS server.
(A1007.0022) (Invalid response authenticator from RADIUS server IP_address:port, check
shared secret)
Meaning: There is a Remote Authentication Dial In Service (RADIUS) server
configuration problem.
Action: Check the shared secret. The shared secret must be configured on
both the RADIUS server and the switch.
(A1007.0023) (Invalid response authenticator from RADIUS server IP_address:port, check
shared secret
Meaning: There is a Remote Authentication Dial In Service (RADIUS)
configuration problem.
Action: Confirm that the shared secret configured on the switch is identical
to the shared secret configured on the RADIUS server.
(A1007.0024) (Invalid access accept from RADIUS server IP_address:port, bad or missing
Service-Type)
Meaning: A service-type Remote Authentication Dial In Service (RADIUS)
attribute was not found in a RADIUS packet.
Action: This is a RADIUS server configuration issue. Consult your RADIUS
server documentation.
(A1007.0025) (Security feature not supported.)
Meaning: The switch is coming out of Non-Disruptive Code Load and
Activation (NDCLA) and had an active security prior to the NDCLA,
but the security feature is no longer supported.
Action: A license key may be required for the security feature.