Filter
Top Products
4 – Managing Switches
Restoring the Factory Default Configuration
4-32 59022-08 Rev. B
D
Port Properties: Restores all settings presented in the Port properties
dialog. Refer to ”Configuring Ports” on page 5-10.
Configured Zoning: Restores all zone sets, zones, and aliases in the
switch’s zoning database.
4.13
Restoring the Factory Default Configuration
You can restore the switch and port configuration settings to the factory default
values. To restore the factory configuration on a switch, open the Switch menu
and select Restore Factory Defaults. Table 4-11 lists the factory default switch
configuration settings.
Restoring the switch to the factory default configuration does not restore the
account name and password settings. To restore user accounts, you must select
the Reset Password File option in the maintenance menu. Refer to “Recovering
a Switch” in the Installation Guide for your switch for information about
maintenance mode and the maintenance menu.
Table 4-11. Factory Default Configuration Settings
Setting Value
Symbolic name SANbox2
Administrative state Online
Domain ID 1
Domain ID Lock False
In-band Management True
Broadcast Support Enable
Resource Allocation Timeout (RA TOV) 10000 milliseconds
FC-SW-2 Compliant True
I/O Stream Guard Disabled
Device Scan Enabled True
Interop Credits 0
Error Detect Timeout (ED TOV) 2000 milliseconds
SNMP Enabled True
SNMP Proxy True
IP address 10.0.0.1
FDMI Enabled True