Filter
Top Products
A – Command Line Interface
Zoning Command
59022-08 Rev. B A-91
D
limits
Displays the number of zone sets, zones, aliases, members per zone, members
per alias, and total members in the zoning database. This keyword also displays
the switch zoning database limits, excluding the active zone set, which are
described in Table A-16. This keyword does not require an Admin session.
list
Lists all fabric zoning definitions. This keyword does not require an Admin
session.
restore
Reverts the changes to the zoning database that have been made during the
current Zoning Edit session since the last Zoning Save command was entered.
save
Saves changes made during the current Zoning Edit session. The system will
inform you that the zone set must be activated to implement any changes. This
does not apply if you entered the Zoning Clear command during the Zoning Edit
session.
Examples The following is an example of the Zoning Edit command:
SANbox2 #> admin start
SANbox2 (admin) #> zoning edit
Table A-16. Zoning Database Limits
Limit Description
MaxZoneSets Maximum number of zone sets (256)
MaxZones Maximum number of zones (256)
MaxAliases Maximum number of aliases (256).
MaxTotalMembers Maximum number of zone and alias members (2000)
that can be stored in the switch’s zoning database.
MaxZonesInZoneSets Maximum number of zones that are components of
zone sets (1000), excluding the orphan zone set, that
can be stored in the switch’s zoning database. Each
instance of a zone in a zone set counts toward this
maximum.
MaxMembersPerZone Maximum number of members in a zone (2000) that
can be stored in the switch’s zoning database.
MaxMembersPerAlias Maximum number of members in all zones and aliases
(2000)