Filter
Top Products
5 – Managing Ports
Displaying Port Information
5-8 59022-08 Rev. B
D
Administrative Port State The port state (Online, Offline,
Diagnostics, or Down) which has been set
by the user. This state may be different
from the configured administrative state if
the user has not saved it in the switch
configuration. This state is used at the time
it is set to try to set the port operational
state. This value is not persistent and will
be lost on a switch reset.
Operational Port State The port state that is currently active. This
value may be different from the
administrative port state, for example due
to an error condition.
Configured Administrative Port State The port state (Online, Offline,
Diagnostics, or Down) which is saved in
the switch configuration, either by the user
or at the factory. This value is persistent; it
will be maintained during a switch reset,
and will be used after a reset to set the
port operational state.
Logged In Indicates whether logged in or not.
E Port Connection Status Whether or not the E_Port is currently
active. It can hold the values None,
Connecting, Connected or Isolated.
E Port Isolation Reason Why E_Port is isolated.
MFS Mode Port tuning indicator.
I/O Stream Guard Whether RSCN suppression is enabled or
disabled.
Administrative Port Speed The speed requested by the user.
Operational Port Speed The speed actually being used by the port.
Interop Credits Whether Interop credits have been set.
Device Scan Queries the connected device during login
for FC-4 descriptor information. Disable
this parameter only if the scan creates a
conflict with the connected device.
Symbolic Name Port symbolic name
Table 5-6. Port Information Data Window Entries (Continued)
Entry Description