Q-Logic SANBOX2-8C/16 Switch User Manual


 
3 – Managing Fabrics
Zoning a Fabric
3-20 59022-08 Rev. B
D
expanded port shows the port Fibre Channel address; an expanded address
shows the port World Wide Name. You can select zone sets, zones, and ports in
the following ways:
Click a zone, zone set, or port icon.
Right-click to select a zone set or zone, and open the corresponding popup
menu.
Hold down the Shift key while clicking several consecutive icons.
Hold down the Control key while clicking several non-consecutive icons.
Figure 3-6. Edit Zoning Dialog
Using tool bar buttons, popup menus, or a drag-and-drop method, you can create
and manage zone sets and zones in the zoning database. Table 3-3 describes the
zoning tool bar operations.
Use the Edit Zoning dialog to define zoning changes, and click the Apply button
to open the Error Check dialog. Click the Error Check button to have SANbox
Manager check for zoning conflicts, such as empty zones, aliases, or zone sets,
and ACL zones with non-domain ID/port number membership. Click the Save
Zoning button to implement the changes. Click the Close button to close the
Error Check dialog. On the Edit Zoning dialog, click the Close button to close the
Edit Zoning dialog.
Port/Device
Tree
Zone Sets
Tree