Filter
Top Products
A – Command Line Interface
Show Setup Command
A-74 59022-08 Rev. B
D
Trap1Enabled False
Trap2Address 0.0.0.0
Trap2Port 162
Trap2Severity warning
Trap2Version 2
Trap2Enabled False
Trap3Address 0.0.0.0
Trap3Port 162
Trap3Severity warning
Trap3Version 2
Trap3Enabled False
Trap4Address 0.0.0.0
Trap4Port 162
Trap4Severity warning
Trap4Version 2
Trap4Enabled False
Trap5Address 0.0.0.0
Trap5Port 162
Trap5Severity warning
Trap5Version 2
Trap5Enabled False
ObjectID 1.3.6.1.4.1.1663.1.1.1.1.11
AuthFailureTrap True
ProxyEnabled True
The following is an example of the Show Setup System command:
SANbox2 #> show setup system
System Information
------------------
Eth0NetworkDiscovery Static
Eth0NetworkAddress 10.20.11.32
Eth0NetworkMask 255.255.252.0
Eth0GatewayAddress 10.20.8.254
AdminTimeout 30
TempMonitoringWarning 65
TempMonitoringFailure 70
TempFailurePortShutdown False
UserAuthentication False
LocalLogEnabled True
RemoteLogEnabled False
RemoteLogHostAddress 10.0.0.254