Filter
Top Products
2 – Using SANbox Manager
Exiting SANsurfer Management Suite
59022-08 Rev. B 2-7
D
In the Save Default Fabric View File dialog, enter an encryption key in the Default
Fabric File Encryption Key field. Re-enter the encryption key in the Re-enter
Encryption Key to Confirm field. Click the OK button to save the current set of
fabrics to the default fabric view file in the working directory.
To prevent SANbox Manager from prompting you to save the default fabric view
file between SANbox Manager sessions, set the View File Auto Save and Load
preferences setting to Enable (default). Refer to ”Setting SANbox Manager
Preferences” on page 2-14 for more information.
Figure 2-3. Save Default Fabric View File Dialog – SANsurfer
In your next SANbox Manager session, the Load Default Fabric File dialog shown
in Figure 2-4 prompts you to load the default fabric view file and to specify its
encryption key, if there is one. In the Default Fabric File Encryption Key field, enter
the encryption key and click the Load View File button. If you do not want to load
the default fabric view file, click the Continue Without Loading button to open
the SANbox Manager with no fabric displayed.
Figure 2-4. Load Default Fabric File Dialog – SANsurfer