Q-Logic SANBOX2-8C/16 Switch User Manual


 
A – Command Line Interface
Show Command
59022-08 Rev. B A-61
D
The following is an example of the Show Interface command:
SANbox2 #> show interface
eth0 Link encap:Ethernet HWaddr 00:C0:DD:00:BD:ED
inet addr:10.20.68.107 Bcast:10.20.68.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4712 errors:0 dropped:0 overruns:0 frame:0
TX packets:3000 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:415313 (405.5 Kb) TX bytes:716751 (699.9 Kb)
Interrupt:11 Base address:0xfcc0
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:304 errors:0 dropped:0 overruns:0 frame:0
TX packets:304 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20116 (19.6 Kb) TX bytes:20116 (19.6 Kb)
The following is an example of the Show Port command:
SANbox2 #> show port 1
Port Number: 1
------------
AdminState Online PortID 150100
AsicNumber 0 PortWWN 20:01:00:c0:dd:00:bc:b8
AsicPort 1 RunningType Unknown
ConfigType G SFPPartNumber Unknown
DiagStatus Passed SFPRevision 0
EpConnState None SFPType NotInstalled
EpIsoReason NotApplicable SFPVendor Unknown
LinkSpeed 2Gb/s SFPVendorID 00000000
LinkState Inactive SymbolicName Port1
LoginStatus NotLoggedIn SyncStatus SyncLost
MaxCredit 12 XmitterEnabled True
OperationalState Offline
ALInit 0 LIP_F8_AL_PS 0
ALInitError 0 LIP_F8_F7 0
BadFrames 0 LinkFailures 26
Class2FramesIn 0 Login 25
Class2FramesOut 0 Logout 24
Class2WordsIn 0 LoopTimeouts 0
Class2WordsOut 0 LossOfSync 1