Filter
Top Products
C – Messages
Faceplate Display
C-12 59022-08 Rev. B
D
The zoning information you are about to
edit is incomplete. If you apply changes
you will possibly lose zoning information.
The application has not been able to
completely read the current zoning
database from the switch. If the user edits
the incomplete database information and
applies the changes, then any information
which has not been read from the switch
will be lost.
If this is acceptable, then continue.
Otherwise, verify that the switch is
reachable in the fabric, and that the fabric
is reachable from the user’s workstation
then refresh the display and verify that the
zoning database has been completely
read, then retry the operation.
Unable to perform request. Switch is
currently unreachable.
Verify that the switch is reachable in the
fabric, and that the fabric is reachable from
the user’s workstation, then retry the
operation.
You can not perform this operation
in-band.
Isolate the switch from the fabric, connect
directly to the Ethernet port, and retry the
operation.
Zone set deactivation failed. Verify that the user has permissions to
modify the configuration on the switch, that
the switch is reachable in the fabric, and
that the fabric is reachable from the user’s
workstation, then retry the configuration
change.
Table C-6. Faceplate Display Messages (Continued)
Message User Action