Filter
Top Products
4 – Managing Switches
Setting Temperature Thresholds
4-18 59022-08 Rev. B
D
4.8
Setting Temperature Thresholds
You can set temperature thresholds by which the switch will generate an alarm or
place the switch offline. The Temperature Thresholds dialog shown in Figure 4-10
prompts you to enter a warning threshold and a failure threshold temperature (°C).
To open the Temperature Thresholds dialog, open the faceplate display, open the
Switch menu and select Temperature Thresholds...
If the switch internal temperature exceeds the warning threshold, the switch
generates an alarm.
If the switch internal temperature exceeds the failure threshold and the
Enable Temperature Failure Port Shutdown box is checked, the switch
generates an alarm and places all ports down. After correcting the problem,
you must reset the switch to bring the ports back online.
Figure 4-10. Temperature Thresholds Dialog