Filter
Top Products
If You Cannot Make Copies As You Want
109
3
If You Cannot Make Copies As You Want
Problem Cause Action
Misfeeds occur frequently. There are folds or wrinkles in
the paper.
Remove the folds or wrinkles
from the roll paper.
Jammed paper or torn paper is
inside the machine.
Remove the paper, as appro-
priate. See P.117 “
x
Clearing
Misfeeds”
The paper is curled. Smooth out the curl and try
again.
Images are cropped when us-
ing the Border Erase function.
The Border Erase setting is to
too big.
The margin of the original is
small.
Reduce the size of the Border
Erase setting. See P.72 “Border
Erase”
Parts of the image are not cop-
ied.
The original is not placed cor-
rectly.
Placing original correctly. See
P.31 “Setting Originals”
An improper paper roll is se-
lected.
Select the proper paper roll.
See P.16 “Copy Paper”
Shift/Erase or Margin Adjust-
ment mode is selected.
Cancel Shift/Erase or Margin
Adjustment mode. See P.68
“Margin Adjustment”, P.70
“Shift”
Copies are blank. The original is not set correct-
ly.
Placing the original with the
surface to copied on to face
up.
The copy paper shifts side-
ways.
The paper roll is not set cor-
rectly.
Set the paper roll correctly,
making sure that it is straight
and not loose. See P.113
“
C
Loading Roll Paper”
The original does not match
size in the original table set-
ting.
Adjust the original guides to
the specified size, and then in-
sert the original along the
guides. See P.31 “Setting Orig-
inals”
The paper is not set correctly
in the bypass tray.
Make sure that the paper
matches the size for the by-
pass tray guides. See P.46
“Copying from the Bypass Tray”
The copy has shifted in the di-
rection of the original feed (or
opposite) direction.
Shift/Erase or Margin Adjust-
ment mode is selected.
Cancel Shift/Erase or Margin
Adjustment mode. See P.68
“Margin Adjustment”, P.70
“Shift”
The copy is shorter than the
selected size. Or the copy is
cut off before the end.