Filter
Top Products
9
3. Original Output Location
Select the original output location from
[Upper], [Rear Straight] or [Rear (Document
Roller)]. See P.22 “Switching the Original
Exit”
4. Basic Reduce/Enlarge
Here you can select basic reduction and
enlargement ratios by pressing the keys.
See P.43 “Auto Reduce/Enlarge”, P.44 “Us-
er Auto Reduce/Enlarge”
5. Functions
Here you can make the basic settings for
Edit Image, Shift/Erase, Reduce/Enlarge
and Stamp. The settings for each function
are displayed in each function key. The
stamp key is displayed when the optional
stamp board has been installed.
Reference
For details, see explanations of
each function.
6. Copy Output Location
Select a copy output location from Front
or Rear. See P.25 “Switching the Copy Exit”
7. Paper Cut Direction
Specifies the direction for cutting roll pa-
per, as well as the length and mode. See
P.48 “Setting the Length of Copy Paper Cut”
8. Sorting
Allows you to arrange copies in sets
(Sort), or change the direction of the sets
(Rotate Sort). See P.51 “Sort/Rotate Sort”
9. Original/Sets/Copy Totals
Displays the number of originals scanned
into memory, the number of sets, and the
number of copies. Pressing [Orig.], resets
the original count to 0. See P.29 “Original
Counter/Reset”
10. Settings Status
Displays messages, etc., describing the
status of various settings. See P.128
“Memory Status Display”
11. Selecting Copy Paper
Selects the paper rolls, or bypass tray, to
be used for copies. See P.42 “Selecting
Copy Paper”