Filter
Top Products
Partial Copy
57
2
Partial Copy
Copies only a specified portion of the
original.
Reference
You can specify the start position
(Y1) and the end position (Y2). See
P.130 “Partial Copy Priority”
A Press the {
{{
{
Sample Copy/Partial
Copy
}
}}
} key.
B Press the
[
Partial Copy
]
key.
C Press the
[
Y2
]
key, and then enter
the scan end position with the
number keys.
Note
❒ To change the value entered,
press the {
Clear/Stop
} key and
enter the new value.
❒ The minimum length for Partial
Copy is 210mm (8.3") (250mm
(9.8") for paper roll 3). Enter a
value for Y2-Y1> that specifies a
length of at least 210mm (8.3")
(250mm (9.8") for paper roll 3).
❒ If the length specified by
[
Y2
]
and
[
Y1
]
is less than 210mm, the
machine adjusts the start posi-
tion based on the last number
you entered.
D Press the
[
Y1
]
key, and then enter
the scan start position.
E Press the
[
OK
]
key.
F Make your desired settings.
Reference
For details, see explanations of
each function.
G Place your originals.
The machine makes a copy of the
specified area.
Exiting Partial Copy
A Press the {
{{
{
Clear Modes/Energy
Saver
}
}}
} key.
ZEDS081E