Filter
Top Products
Other Functions
55
2
Other Functions
Energy Saver Mode
If you do not operate the machine for
a certain period after copying, or
when you press and hold the {
Clear
Modes/Energy Saver
} key for more than
two second, the display disappears
and the machine enters Energy Saver
mode. When you press the {
Clear
Modes/Energy Saver
} key again, the
machine returns to the ready condi-
tion.
In Energy Saver mode, the machine
uses less power consumption. The
Energy Saver mode makes a two-step
reduction in power consumption: one
for the period up to the time set for
Low Power mode, the other for the
period after that time.
Reference
For Panel Off Timer setting, see
"Panel Off Timer" in the "System
Settings" manual.
For Energy Saver Timer setting,
see "Energy Saver Timer" in the
"System Settings" manual.
Auto Start
If you make the settings and scan the
originals while the message "Ready to
Copy" is displayed, your copies will
be made as soon as warm-up finishes.
User Codes
If the machine is set to use the User
Code function, operators must input
their user codes before the machine
can be operated. The machine keeps
count of the number of copies made
under each user code.
Note
❒ When the machine is set for user
codes, the machine will prompt
you for your user codes after the
operation switch is turned on or
the Auto Reset comes into effect.
❒ To force the machine to display the
user code entry screen, press the
{
Clear/Stop
} key while pressing the
{
Clear Modes/Energy Saver
} key.
Reference
For user code settings, see "User
Code Access" in the "System Set-
tings" manual.
For details on storing, changing, or
deleting user codes, see P.141 “Pro-
gram/Change/Delete, User Code”.