Filter
Top Products
Basic Functions
43
2
Limitation
❒ If you select the tray paper type
setting to
[
Translucent
]
or
[
Film
]
(ex-
cept for
[
Plain
]
or
[
Recycled paper
]
),
the auto paper select function will
not be used. For tray paper type
setting, see "Tray Paper Type" in
the System Settings manual.
❒ If the type of paper changes when
you select the paper source, it may
take longer for copying to start.
❒ When using a 30" width original,
set the original size auto detect set-
ting to off. See P.128 “Original Size
Auto Detect”
Note
❒ If you press the {
Clear Modes/Energy
Saver
} key immediately after turn-
ing the power on, you can specify
the paper roll to be used as the de-
fault setting for Auto Reset. The
default setting is paper roll 1. See
P.127 “Paper Roll Priority”
Reference
⇒ P.46 “Copying from the Bypass
Tray”
Auto paper select
A Make sure that the
[
Auto Paper Se-
lect
]
key is selected.
Note
❒ When Auto Paper Select is se-
lected, it may take slightly long-
er for copies to make since the
machine selects the paper after
scanning the original.
Manual paper select
A Select the paper roll 1, paper roll
2, paper roll 3 (option), or bypass
tray.
Auto Reduce/Enlarge
The machine can choose an appropri-
ate magnification based on the paper
and original sizes you select.
ZEDG020E