Filter
Top Products
Copying
22
2
Important
❒ The paper capacity indicated assumes the use of standard copier paper, and
should only be used as a guide. If the paper exceeds the upper limit, the cop-
ies may become folded or cause paper jams.
Switching the Original Exit
Select the appropriate output from
[
Upper
]
,
[
Rear (Straight)
]
, or
[
Rear (Document
Roller)
]
, for the type of original you are using.
❖
❖❖
❖
Upper
This is the basic output exit for originals. The originals are ejected to
[
Original
Output (Upper)
]
.
❖
❖❖
❖
Rear (Straight)
When copying thick, or hard, originals, select
[
Original Output (Rear (Straight))
]
.
The originals are ejected to
[
Original Output (Rear (Straight))
]
.
❖
❖❖
❖
Rear (Document Roller)
If you select
[
Rear (Document Roller)
]
when copying long length originals, the
original is ejected to document roller. See P.24 “Original output (Rear (Docu-
ment Roller))”.
Important
❒ Use the carrier sheet with
[
Original Output (Rear (Straight))
]
. If you use
[
Original
Output Rear (Upper)
]
, your originals may be damaged.
Copy out-
put
Copy Out-
put (Front)
A1 (D)
L
or
less:
99 sheets (plain paper)
10 sheets (translucent paper (vellum))
1 sheet (film)
• Same size copy paper
Copy Out-
put (Rear)
A1 (D)
K
,
A0 (E):
10 sheets (Plain paper)
1 sheet (Translucent paper (vellum))
1 sheet (film)
• Same size copy paper
• When using A0 size copy paper, attach the copy out-
put (rear) auxiliary guide. See P.26
“Using rear output
for A0 (E) Paper”