Filter
Top Products
2
11. Original table
Place your originals here.
12. Original guide
Set this to the width of your originals.
13.
Paper Path Section Release Lever
Use this lever to open the paper path
section to clear paper jams or cleaning.
Important
❒
Do not leave the paper path sec-
tion left open for more than 10
minutes.
14. Bypass tray
Use this tray to make manual feed
copies.
❖
❖❖
❖
Rear
1. Document roller
This stores long length originals on
rolled long paper after they have been
fed through the machine. See P.22
“Switching the Original Exit”
2. Original output (Rear (Straight))
This holds originals that are ejected at
the back of the machine. See P.22
“Switching the Original Exit”
3. Fusing unit cover
This protects the fusing unit.
4. Copy output (Rear)
This stores copies output to the rear of
the machine.
5. Copy output (Rear) auxiliary
guide
This prevents paper from getting
caught in the rear of the copy output
(rear) sticker, when feeding A0 size (E
size) paper from the rear of the ma-
chine. See P.26 “Using rear output for
A0 (E) Paper”
ZEDH330E
1
2
3
4
5