Filter
Top Products
Copying
76
2
Delete Outside
Copies the original while erasing
parts outside a specified area.
Limitation
❒ If the original is larger than A1,
you can only specify one area
(Metric version only).
❒ If the original is larger than C, you
can only erase one area (Inch ver-
sion only).
Note
❒ The area is specified by defining
two points for the top left of the
original (X1, Y1) and two points for
the size of the area (X2, Y2). Mea-
sure the area you want to specify
before entering the area settings.
❒ When using this function with the
magnification function, the actual
setting will be the specified setting
multiplied by the reproduction ra-
tio.
❒ You can specify up to 5 areas.
A Press the
[
Shift/Erase
]
key.
B Press the
[
Delete Outside
]
key.
C Press the
[
Y1
]
,
[
Y2
]
,
[
X1
]
and
[
X2
]
keys to select the delete position,
and enter the values to specify the
area, and then press the
[
#
]
key.
D To specify several areas, specify
areas 1 – 5 in the same way.
E Press the
[
OK
]
key.
Delete Outside
ZEDX020E
ZEDG140E
Area