Filter
Top Products
User Tools (Copier Features)
128
4
❖
❖❖
❖
Print Start Trigger
Specifies whether all the originals should be scanned first, or not.
To scan the originals first and then copy when the {
Start
} key is pressed, press
the [
Press Start Key
] key, To start copying automatically after the originals
have been scanned, press the [
Set Original
] key.
• Press Start Key
• Set Original
Note
❒
Default: Set Original
❖
❖❖
❖
Original Size Auto Detect
Specifies whether to detect the size of the original or not.
If On is selected, the machine automatically detects the size of the original. If
Off is selected, the machine ignores the original size and assumes it is the larg-
est size original. For example, to copy a an original 841mm wide, or JIS B se-
ries size or other custom size original, set this setting to Off to scan the
original at the maximum width of 914mm. (In this case, be sure to select a pa-
per size larger than the original when making the copy. (When enlarging, be
sure to select a size larger than the original size × reproduction ratio.))
•Off
•On
Note
❒
Default: On
❒
When using 30" width original, set this setting to Off.
General Features 2/2
❖
❖❖
❖
Memory Status Display
Specifies how the amount of remaining memory should be displayed. If you
select [
Page
], it is displayed as a number of A1(D) pages.
• Percentage
•Page
Note
❒
Default: Page
❖
❖❖
❖
Maximum Copy Quantity
Specifies the maximum number of copies that can be made with the Repeat
Copy function. See P.34 “Repeat Copy”
Note
❒
Default: 99 copies
❒
The value can be set from 0 to 99 copies.