Filter
Top Products
1
2-1
Slide the metal tabs on the copy tray Into the slots In the bottom of the machine
Attach the copy retainer wire to the top of
the tray separator as shown. Be sure that the
“L” at the bottom of the retainer wire faces
toward the tray separator
2 -2 Attach the tray separator to the copy tray
3
4
Fit the hinge holes on the tray separator onto
the hinge pins on the bottom of the copy
tray Then Insert the pins on the top of the
tray separator Into the openings in the top of
the copy tray
Hook the document tray onto the tray separator There are four possible positions
Attach the document feed out guide Peel off the tape and attach the guide below
the center of the document exit
3-7