.
—
1)
2)
3)
4)
5)
6)
rroceaure —
Press the Function key.
Enter 3 at the keypad.
Note:
If ‘TRANSFER TRANS MODE’ does not
appear, your fax telephone number is not
programmed. You should program it now.
See page 9-19.
Place the document into the feeder. Select the con-
trast and resolution.
Enter the number of
quired, and press Yes.
pages at the keypad, if re-
Enter your department code at the keypad, if re-
quired, and press Yes.
Enter the broadcaster’s number, either as a Quick
Dial key, Speed Dial code, or full telephone number
(not using the telephone).
Example: Quick Dial key A
7) Press Yes (or, press No to correct).
READY
100’%
1!30
SELECT MODE ¤~ KPAD
TRANSFER TRANS
MODE
SET DOCUMENT
TRANSFER TRANS
MODE
PAGES 00
KEYPAD N
—
TRANSFER
TRANS
MOOE
OEPT CO DE 000 OK PAD N
TRANSFER
TRANS
MODE
0b113K#s AFm
KEYPAD
—
NEW
YORK OFFICE
Qbl CK#SAFA
YN
TRANSFER TRANS MODE
*
QUICK SPEED KPAO
8) Either:
Enter a receiver number, either as a Quick Dial key,
Speed Dial code, or full telephone number (not
using the telephone).
Example: Quick Dial key B
TRANSFER TRANS MODE
OUICK#B
KEYPAD Y
8-6