Filter
Top Products
If polling is time designated, a polling file list WIII be
PRINT
printed and the unit WIII return to standby.
POLL
FILE LIST
SET
DOCUMENT
If polling IS immediate, the terminal will begin to
dial
213
5557324
DIALING
If the polled location is busy, your terminal will
redlal up to twice at intervals of five minutes
Notes:
To cancel a preprogrammed time-designated polling reception operation, use
mode 66 (see page 9-1 7)
POLLING RECV STANDBY
If this is displayed, a message was coming in at the designated polling time or
when you pressed Start Polling will begin Immediately after the end of recep-
tion
RestrictIons
Maximum number of destinations per polling file 100
Maximum number of polling files: 8
Maximum number of destinations over all polling files. 300
Note that the total number of addresses stored in the machine for polling recep-
tion and memory transmission, when added together, can not exceed 300
CAUTION:
Delayed programmed polling files are erased automatically after polling
2.
unless there is a line problem
Polling Transmission
This feature allows you to leave a document in the feeder
up This will place your terminal in polling standby mode
Reception can take place as normal in polling standby mode
for a remote terminal to pick
Note:
Polling transmission can be either free or secured,
Free polling –
Polling ID codes will not be checked. Any compatible termi-
nal can poll yours.
Secured polling – Polling ID codes will be checked If a machine with a different
ID code tries to poll your terminal, it will not succeed
8-11