Filter
Top Products
9. FUNCTIONS AND PROGRAMMING
This machine has a wide range of programmable functions. Study these functions to get the
most out of the machine. Program these functions while the machine is in standby mode.
If you want to return the machine to standby mode at any time while programming, press
the Function key.
Note: .
●
●
If you entered the wrong function number, press the Function key again The
machine will return to standby.
When waiting for your response to a prompt, the system will time out and
return to standby if a response is not input within 40 seconds
If this occurs, you must repeat the entire procedure until you return to the point
you were at before the system timed out.
All programmed items remain inthe memory even if you switch the power off.
Functlon key
9-1 Clock Adjustment
1)
2)
3)
Press the Function key, then enter 50 at the keypad.
Press Yes.
Either:
Change the item at the cursor (blinking item).
● Increment with #.
● Decrement with ,
Or:
Move the cursor with Clear.
Or:
Press Yes to store the displayed data into the clock
and go on to function 51.
Or:
Press Function to store the displayed data into the
clock and go back to standby.
9-1
MODE NO 50 YN
ADJuST CLOCK?
DATE & TIME Y*bc
APR 14 87
1130
DATE &
TIME
Y*#c
MAY 14 87
1130
DATE & TIME Y* ’#c
MAY 14 87 1130
—
L—
MODE NO 51
YN
TO TAL# Tx’Rx