Filter
Top Products
4)
5)
6)
Enter the required transmission time (24-hour
clock) at the keypad. To correct an error, press No.
Example: 2:30 a.m.
Caution:
If you take more than 40 seconds to
enter the time, the display will reset to
the present time.
Press Yes.
Enter the destination telephone number(s) as:
. Quick Dial Key(s)
. Speed Dial Code(s)
. Full telephone number(s) at the keypad
● Group(s)
. Any combination of the above.
Press Yes after each entry.
Quick Dial Key:
Press the desired Quick Dial key (e.g., A). Press No
to correct an error.
Speed Dial Code:
i)
Press the Speed
Dial Key.
ii) Enter the required two-digit Speed Dial code
(e.g., 59). Press No to correct an error.
Full Telephone Number at the Keypad:
Enter the telephone number (e.g., 5556831 ). Cor-
rect any errors with No (complete clearance) or
Clear (previous digit).
MEMORY TRANS
MODE
TIME 02 30 KEYPAD/Y
—
MEMORY
TRANS
MODE
* QUICK SPEED KPAD
NEW YORK
OFFICE
OUICK~A
Y(N
Phone No of Speed#59 IS d!splayed
/
213-5551311
sPEED #59
YIN
MEMORY TRANS MODE
5556831
KPAD Y
A group is a preprogrammed set of addresses. For more information on these, refer to
page 9-12.
To enter a group, first press,, then the number of the desired group.
Caution:
If you enter
● then O (zero), the document will be sent to all the numbers
stored ingroups 1 thru 7.
7-8