Filter
Top Products
9-11 Entering the RTI, TTI, and CSI
These labels Identify your terminal at the remote terminal.
RTI – This identifier will be displayed on the remote terminal operation panel during
communication.
When you start a transmission, the RTI (or CSI) of the remote terminal will be dis-
played on your terminal.
TTI – This identifier will be printed at the remote terminal on the top of each page that
you send
Csl –
This identifier is used instead of the RTI during communication with another
maker’s terminal
1)
2)
3)
Either:
To program the RTI, press the Function key, enter
63, and go to step 2.
Or:
To program the TTI, press the Function key, enter
64, and go to step 4.
Or:
To program the CSI, press the Function key, enter
65, and go to step6
Press Yes
Enter the required RTI, in up to 20 characters. You
could use your name, company, department, or
phone number. Use the Quick Dial keypad and the
MODE
NO 63 YN
SET RTl~
MODE
NO 64
YIN
SET TTl~
I
MODE
NO 65
YIN
~ SET CSl~
1.
r
I
RTI KPAD
Y
ten-key pad
To enter a space, press Pause~Redial.
If you are editing an old RTI, you can move the
cursor with the Clear key.
Note: If a label is already present, you may change it, starting from the first character.
The full character set is given on page 9-9.
.—
Example RICOH
I
RTI
KPAD Y
~
RlCOH=~9~=~~~S~~~==~
.—
Press Yes to store this RTI.
r
RTI
KPAD
Y
PROGRAMMED
L
.——.—
MODE NO 64
YIN
SET TTl~
.—
9-15