Filter
Top Products
—
Checking the Recorded Message –
To check what you recorded:
1) Press the AVM Mode key.
2) Press 2.
AvM
MODE
KPAD<N
RE CO- I CO NF - 2SLCT 3
START
PRESS
START
—
3) Press Start.
The message will be replayed through the monitor
PLAYING
speaker (or through the handset if it is off-hook).
L. —
r
~ AVM MODE KPAD N
RE CO- lCONF - 2SLCT 3
.
—
Message Transmission Enabling –
You can enable or disable message transmission as follows.
If message transmission is enabled and if a message has been recorded, it will always be
sent out before reception if your machine is in automatic reception mode and if the machine
that called you did not use auto-dialing; if it is disabled, it will never be sent out.
1) Press the AVM Mode key.
2, Press 3.
3) Either:
Press
● to enable recorded message transmission.
Or:
Press # to disable recorded message transmission.
4) Press the Yes key.
The AVM Mode Indicator is lit when AVM is
enabled.
AVM
MODE
KPADN
I
RE CO- 1 CO NF - 2SLCT - 3
.
The Current Status
\
MESSAGE ON
ON–* OFF–#
. . —
———
MESSAGE ON
I
1: N :_* .1’ F - !_
.——
MESSAGE
OFF
ON–*
OFF–#
—
L——_
r
READY 100% 1130
ISET DOCUMENT
9-24