Ricoh NC5006 Copier User Manual


 
WHAT IS AREA EDITING
Color Editing
Up to 6 groups of multiple areas can be edited. All the areas should belong to groups 1 to 6.
!
!
,__\
1—,
( 5 ‘, /-,
L————
/’61
/––1
~.,
. . .
[2
‘.
I
J
---
-----
,-
..6.
IJ
c1
In Color Editing mode, you can select up to three job patterns for at most six groups.
After you have set three patterns, the copier will only allow you to choose the pattern of
a previous group,
If you change the settings for one group, it will change the settings for all other groups
with the same job pattern.
However, if you used a paint setting, changing the color in one group will not affect other
groups. (Up to 6 paint colors can be selected.)
Image Adjustment (Sharp/Soft, Contrast, Background Density, Pastel Image) can be
applied for the outside area only when you select the adjustment levels, as explained in
Chapter 6, before you start the area editing operation (explained in this chapter),
Total number of areas which can be designated:
Rectangle method:
at most
Right Angle Polygon method: at most
s Polygon method:
at most
Closed Loop method: at most
250 areas
50 areas
50 areas
500 areas
Cl For details about designating method (Rectangle/Right Angle Polygon/Polygon/Closed Loop), see page
7-10.
0 Areas grouped together must
be made in compatible modes.
Cells marked O indicate modes that can be selected for each group of areas and outside all
the designated areas,
Inside Area
Ri ht Angle
Outside Area
Rectangle
8olygon
Polygon
Closed Loop
Full Color Copy
o 3
3 0
3
Black Copy
3 D 3 3 3
Single Color Copy o
0
3 3
3
Auto Image Density
*1o *13 *1o *13 *13
Color/Image
Adjustment
Manual Image Density a 3
D 3
0
Auto Letter/Photo
x x x
x
3
Photo mode
o 3 3 3 3
Letter mode o 3
3 3 3
Color Balance Adjustment %?0 Xl Tc)
%0 93
Single
ColorAdjustment 99 %23 93
%23 %23
Color Background
o 3
Color Creation
3 (3 3
Paint Area
o
3
3
3 3
Delete Area (Delete inside of an area)
... ..............................................
o 3
3
.........................................................
x
.-
:;:~::::::::::::::::::::::::::::::::::::::::j:
.. ..............................................
.........................................................
:
:::::::::::::::::::::::::::::::::::::::::::::::::::::
Save Area (Delete outside of all areas)
.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:+:+:
..................... ......... ......
0 3 3 x
.:::::::::::::::::j;::::j:~.:::
........................................................
........................................................
.:.:::.;.W..Y..;..;.;.:.;.:.:.:.:.*X
*1:Availableonlywhen Single Color Copy mode or Black Copy mode is selected
*2: Available only when Full Color Copy mode is selected.
7-6