Filter
Top Products
SHADING
Insert the “P” (Positive) filter (= page
10-9) in the left slot as shown in the
illustration.
~ Becareful
to insert the filter as shown, not
the other way around..
Cut the positioning sheet to match the
film size. (= page 10-10 “Cutting The
Film Position Sheet” )
Place the positioning sheet under the
mirror unit (on the exposure glass).
B Placethe markedcornerof
the film posi-
tion sheet at the rear left corner of the
exposure glass.
D Before going to the next step, make sure
that the fresnel
lens is lowered in position.
Touch the Shading key.
D The
copier will start shading automat-
ically.
Lift the fresnel lens, place the film in-
side the film position sheet, and lower
the fresnel lens.
0
Place the film face down.
Cl If the film is curled, the copy image may
be out of focus. In this case, make the
cutout film position sheet a little smaller
than the film size and use it to hold the film
down.
Check the film size, touch one of the
keys, and touch the Exit key.
u
PositiveFilmPO~itiveFilm Under The Lens
UnderLens
1.
2.
3.
4.
5.
6.
k!E!!dl
10-14