Filter
Top Products
PREPARING FOR COPYING
~ When setting film, leave the base film in
the film strip holder. This is convenient
when performing shading again.
2. Adjust the position of the film.
~ Do not touch the image parts of the film
when adjusting.
3. Close the film strip holder and lock it
as shown in the illustration.
Cutting The Film Position Sheet (If Needed)
IJ If you do not use the holders and position the film on the exposure glass, a positioning sheet is required.
The positioning sheet should be cut in
the center with the film size, so that you
can place your film in the center. Two
position sheets are included as
originals in this machine, so, make a
copy from the original sheet, cut the
surrounding margin on the dotted
lines, and cut away the center part
corresponding to the size of the film to
be copied.
?
1o-1o