Filter
Top Products
SETTING ORIGINALS
Setting Originals In The Dual Job Feeder
Non-recommended Originals
Caution: The following types of originals are not recommended for use with the dual job
c1
c1
c1
c1
c1
c1
n
feeder. Please place them directly
Originals with a paper weigh greater than 128 g/m2
Originals larger than A3C3, 11“xl 7“ ~
Cl
originals thinner than 47 g/m2 or 11 lb
CJ
Folded, curled, creased, torn, or damaged
Cl
originals.
Damp originals
c1
Mailing labels, or perforated originals
c1
OHP transparencies
Cl
on the exposure glass. (= page 4-2)
or 34 lb
Originals smaller than A5 Q (A4/A3 machines),
or
51/2’’x8I/2° ~ ~ (LT/DLT machines)
Non-standard sized paper
Pasted originals
Any coated paper (carbon, thermal paper, etc.)
Bound, stapled, or clipped originals
Paper with any kind of coating (such as carbon) on the
back, or originals that are taped together.
Setting A Stack Of Original (ADF/ARDF mode)
1. Correct any curl, fold, or crease in the
originals before setting. Square the
stack of originals.
2, Confirm that the
Insert Original in-
dicator is lit before setting.
3. Confirm that no previous originals
remain on the exposure glass,
4. Adjust the original guide to the original
size.
+
4-4