Filter
Top Products
SETTING PAPER ON THE BY-PASS FEED TRAY
Cl When using OHP transparencies, make
sure to load the copy side up, otherwise
fusing jams might occur,
There are types of transparencies that
have the opposite side marked “up” be-
cause some copier models apply toner
from underneath. This machine applies
toner from above.
Check the label on the package, or contact
your supplier to find the copy side.
D OHP transparencies should be fanned
before loading to get air between the
sheets.
4.
Make copies.
5. After finishing copying, return the by-
pass feed tray to its original position.
3-7