Filter
Top Products
II
NegativeFilm
UnderLens Negative Film Under The Lens
1.
2.
3.
●
4.
5.
6.
7.
Set the base film in the film strip holder.
(E=page 10-8)
Open the film cover and while pressing
the holder lever to the right, insert the
film strip holder slightly in the right slot.
Insert the holder until the * mark
placed as shown in the illustration.
is
Insert the “N” (Negative) filter (= page
10-8) in the left slot as shown in the
illustration.
Cl Be careful to insert the filter as shown, not
the other way around..
Cut the positioning sheet to match the
film size. (= page 10-10 “Cutting The
Film Position Sheet” )
Place the positioning sheet under the
mirror unit (on the exposure glass).
~ Place the marked corner of the film posi-
tion sheet at the rear left corner of the
exposure glass.
~ Before going to the next step, make sure
that the fresnel lens is lowered in position.
Touch the Shading key.
~ The copier will stati shading automat-
ically.
10-15