Filter
Top Products
USE AND STORAGE OF SUPPLIES
USE AND STORAGE OF SUPPLIES
Use of Copy Paper
tJ For good copy quality, please use the type of paper and OHP transparencies recommended
by your sales/service representative.
- Non-recommended copy paper -
The following types of copy paper are not recommended for this copier.
● Curled paper
● Wavy or creased paper
●Torn paper
● Damp paper
QBound paper
“ Tracing paper
● Any coated paper (carbon, thermal paper, etc.) ● Paper with low stiffness
● Extra smooth paper or paper that tends to stick together.
● Paper with low electrical resistance
- Others -
#To avoid paper misfeeds or copy image problems, do not use paper that has already been
copied on as copy paper.
CJWe recommend using OHP transparencies made especially for color copying.
Using other
types of transparencies might lead to loss of brightness when the image is projected.
Cl Adhesive labels and OHP transparencies can be loaded only
in the by-pass feed tray. When
copying on adhesive labels, insert them one sheet at a time.
ClThick paper(104g/m
2- 157g/m2 or 28-42 lb) can be loaded only in the by-pass feed tray.
#When copying on rough surface paper, the copy image maybe light,
Paper Storage
Paper should always be stored properly. Improperly stored paper may result in poor image
reproduction, creased copies, and paper misfeeds.
CJAvoid storing paper in humid areas. (Under high temperature and high humidity conditions,
store copy paper in a vinyl bag,)
#Do not store paper where it will be exposed to heat.
ClStore on a
flat surface.
Cl Use older stock first.
Cl Do not lay heavy objects on paper.
#
Keep open reams of paper in the package, and store them as you would unopened
packages.
3-2