Filter
Top Products
Standard Copy Job Settings COPYING
Standard Copy Job Settings
If you want to make copies identical to the originals (same colors, same size), make sure that
the standard modes listed below are selected.
2
1. Full Color mode
In this mode, copies are made with the same colors as the
only black images, select the
Black Copy mode.
(For details about color selection, see page 5-3.)
1
3
4
5
original. If you use originals with
2. Manual Image Density mode (Image Density Adjustment)
There are 9 levels of image density. Level 4 is the standard image density.
(For details about image density adjustment, see page
5-4.)
Cl Auto Image Density mode cannot be selected when in Auto Color Select mode or Full Color mode.
3. Auto (Letter/Photo) mode
The copier automatically detects the letter parts and photo parts of an original. The letter
parts are copied in the Letter mode, and the photo parts are copied in the Photo mode.
(For details about original image type selection, see page !5-5.)
4. Auto Paper Select mode
The copier selects a suitable size of copy paper based on the original size and the
reproduction ratio. It is not necessary to select a paper tray manually.
(For details about paper selection, see page 5-6.)
Cl The copier cannot detect original size smaller than A5 or 51/2” x 81/2”.
5. Full Size mode
The copier will make copies of the same size as the originals.
(For details about reduction and enlargement, see page 5-9.)
4-9