Filter
Top Products
OTHER BASIC OPERATIONS
Clearing Data Entered By The Number Keys
0(9(9
-4
0
C/@
<
I
To clear data you have just entered with the Number (O-9) keys,
press the Clear/Stop key.
Then re-enter the desired number with the
Number (O-9) keys.
Canceling All
The Job Settings
To cancel all the manually selected job settings, press the Clear
o
Modes/Stand by key.
[Q/(J ] [a
D&
23
mmf%
Stopping The Copier During A Copy Run
piJ(5-J(’lJ
To stop the copier during a copy run, press the Clear/Stop key.
-4
The copier will finish the copy being made and stop, If you have
o
Cle
4
key again so that the original placed on the exposure glass will be
placed the originals into the dual job feeder, press the
Clear/Stop
fed out automatically,
Recalling The Previous Job Settings
1
This copier will automatically store the previous copy job settings
o
[$/(!) ] [=
)
at the previous copy run. Press the Memory Call key, You can
change the recalled job settings,
pi)o
23
mmm
a
Interrupting One Job To Do Another
Press to interrupt a multicopy run to make urgently needed copies
(Interrupt mode). The interrupted copy job settings are stored in
the copier’s memory. After interrupt copying is completed, press
this key again to recall the previous job settings.
4-12