Filter
Top Products
INSTALLATION REQUIREMENTS
INSTALLATION REQUIREMENTS
Copier Environment
The installation location should be carefully chosen because environmental conditions greatly
affect the performance of a copier,
- Optimum environment conditions -
CJTemperature: 10- 32°C (50 - 89”F)
Cl
Humidity: 15-90%
ClA strong and level base.
IJ The copier must be level within
5 mm (0.2”) both front to rear and left to right.
Cl
To avoid possible build-up of ozone, make sure to Iocatethis copier in a large well ventilated
room which has air turnover of more than 30ms/hr/person.
Environments To Avoid
Cl Locations exposed to direct sunlight or strong light (more than 2,000 Iux),
~ Locations directly exposed to cool air from an air conditioner or heated air from a heater.
(Sudden temperature changes may cause condensation within the copier,)
~ Places where the copier may be subjected to frequent strong vibration,
0 Dusty areas.
ClAreas with corrosive gases.
Power Connection
IJ About the power source: see the inside of the front cover page.
CIAvoid multiwiring.
CJMake sure that the wall outlet is near the copier and easily accessible,
Cl Make sure the plug is firmly inserted in the outlet.
~ Voltage must not fluctuate more than 10?40.
Cl Do not set anything on the power cord.
1-4