Filter
Top Products
U
SER
A
UTHENTICATION
3-67
CLI – This example sets the authentication mode to enable 802.1x on port
2, and allows up to ten clients to connect to this port.
Displaying 802.1x Statistics
This switch can display statistics for dot1x protocol exchanges for any
port.
Statistical Values
Console(config)#interface ethernet 1/23-1
Console(config-if)#dot1x port-control auto3-106
Console(config-if)#dot1x operation-mode multi-host max-count 103-107
Console(config-if)#
Parameter Description
Rx EXPOL Start The number of EAPOL Start frames that have been received
by this Authenticator.
Rx EAPOL Logoff The number of EAPOL Logoff frames that have been
received by this Authenticator.
Rx EAPOL Invalid The number of EAPOL frames that have been received by
this Authenticator in which the frame type is not recognized.
Rx EAPOL Total The number of valid EAPOL frames of any type that have
been received by this Authenticator.
Rx EAP Resp/Id The number of EAP Resp/Id frames that have been received
by this Authenticator.
Rx EAP Resp/Oth The number of valid EAP Response frames (other than
Resp/Id frames) that have been received by this
Authenticator.
Rx EAP LenError The number of EAPOL frames that have been received by
this Authenticator in which the Packet Body Length field is
invalid.
Rx Last EAPOLVer The protocol version number carried in the most recently
received EAPOL frame.
Rx Last EAPOLSrc The source MAC address carried in the most recently received
EAPOL frame.
Tx EAPOL Total The number of EAPOL frames of any type that have been
transmitted by this Authenticator.