SMC Networks SMC8612XL3 F 1.0.1.3 Switch User Manual


 
R
OUTER
R
EDUNDANCY
C
OMMANDS
-235
Field Description
Local state State of the local router:
Active - Current master router.
Standby - Designated backup router next in line to take over as the master
router.
Speak - Router is sending packets to claim the master or standby role.
Init - Router is not ready to participate in HSRP. A router may be in this
state because the associated interface is not up, the interface is in an
HSRP group on other routers in the network that were learned via
snooping, or a local group has been configured without a specified IP
interface.
Listen - Router is not in the active nor standby state. If no messages are
received from the active or standby router, it will start to speak.
Learn - Router is not in the active nor standby state, nor does it have
enough information to attempt to claim the master or standby roles.
priority Priority of this router.
may preempt Router will attempt to take over as the master router if its priority is higher.
Preemption
delayed
Delay before a router with higher priority can preempt the current acting
master
Hellotime Interval at which this router advertises when acting as the master or
standby router
Next hello
sent
Time before the next hello packet will be sent
Host standby
IP address
IP address of the master router
Active router The master router can be “local” or an IP address. Local implies this
router. If an address is display, it indicates the current active master router.
Standby
router
The standby router can be “local” or an IP address. Local implies this
router. If an address is display, it indicates the current standby router.
Standby
virtual mac
address
The virtual MAC address for this HSRP group. This is always
0000.0C07.ACxy, where xy is the hexadecimal value of the group number.