![](http://pdfasset.owneriq.net/6/90/69029205-8bce-4051-bf2a-3f7a074bd3a4/69029205-8bce-4051-bf2a-3f7a074bd3a4-bg232.png)
C
OMMAND
L
INE
I
NTERFACE
4-166
Command Mode
DHCP Pool Configuration
Usage Guidelines
• If DNS IP servers are not configured for a DHCP client, the client
cannot correlate host names to IP addresses.
• Servers are listed in order of preference (starting with address1 as the
most preferred server).
Example
next-server
Use this command to configure the next server in the boot process of a
DHCP client. Use the no form to remove the boot server list.
Syntax
next-server address
no next-server address
address - Specifies the IP address of the next server in the boot process,
which is typically a Trivial File Transfer Protocol (TFTP) server.
Default Setting
None
Command Mode
DHCP Pool Configuration
Example
Related Commands
bootfile (3-167)
Console(config-dhcp)#dns-server 10.1.1.253 192.168.3.19
Console(config-dhcp)#
Console(config-dhcp)#next-server 10.1.0.21
Console(config-dhcp)#